Specification
Detection Limit of As, Sb, Bi, Se, Te, Pb, Sn 0.03 µg/L
Detection Limit of Hg (Solid, Gas, Water) 0.003 µg/L, 1.0 ng/m3, 0.0004 µg/L
Detection Limit of Cd 0.001 µg/L
Detection Limit of Zn 2.0 µg/L
Detection Limit of Ge 0.3 µg/L
RSD of As, Sb, Bi, Se, Te, Pb, Sn 1%
RSD of Hg (Solid, Gas, Water) 1%, 5%, 2%
RSD of Cd 1%
RSD of Zn 1%
RSD of Ge 1%
Linear Range of As, Sb, Bi, Se, Te, Pb, Sn 103
Linear Range of Hg (Solid, Gas, Water) 103, 102
Linear Range of Cd 103
Linear Range of Zn 103
Linear Range of Ge 103
Catalog No. 9524123442

Atomic Fluorescence Spectrophotometer LAFS-103

Details

• Vapor/Hydride Generator

  1. Advanced Vapor/Hydride Generator offers enhanced sensitivity, reduced interference, and ultra-low detection limits for the determination of sub-trace levels of Mercury and hydride forming elements.

• Advanced Gas/Liquid Separator

  1. State-of-the-art design of low dead volume, high efficiency, double gas/liquid separator optimizes the separation of hydride and Hg cold vapor. This design minimizes pressure fluctuations thus enhancing the precision of the measurement.

• Reaction/Mixing Manifold

  1. The reaction/mixing manifold include multi-mixing levels for easy combination. It enables unlimited flexibility in mixing patterns.

• Optical Design

  1. Shield optic design greatly reduces light interference and enhances the signal-noise ratio, increasing the sensitivity and precision of the measurement.

• Dual Channel Simultaneous Analysis

  1. The new light path design enables simultaneous analyse of two elements which greatly increasing the efficiency of measurements.

• Exhaust System

  1. The integrated exhaust system effectively decontaminates the exterior pollution, thereby enhancing the accuracy of the measurements.

• User-Friendly, Windows-Based Software

  1. The graphical interface software provides ease of operation, method development, auto samplercontrol and data acquisition/analysis. It enables real-time display of fluorescence intensity against time for both channels.

• Environment protective with high efficiency Hg elimination technique, decontaminates Hg pollution in lab environment efficiently

• Quartz atomizer with infrared heating temperature control technique designed for optimum performance and durability

• Hydride/vapor generator and gas-liquid separation system

• Adopts light closed optical alignment system

• Adopts special technique for “Gaseous mercury determination” and “Determination of ultra-trace Hg in water samples”

• Automatic liquid waste discharge

• Auto gas line control and alarm system

• Simultaneous analysis of elements

• RS232 port supports USB interface communication

• Windows 98/Me/2000/XP operating software with real time display of fluorescence signal

Application

Labocon Atomic Fluorescence Spectrophotometer LAFS 100 series is widely used in metallurgical and geological industries, petrochemical, pharmaceutical industries, water supply and drainage, education and scientific research, clinical diagnostic, public health and disease control, agriculture, environmental monitoring.

Your Recent History View All
    • Speed: 50-180 rpm
    • Capacity of Evaporating Flask: 500, 1000 ml
    • Capacity of Receiving Flask: 1000 ml
    • Type Of Heating Bath: External heating
    • Power of Heating Bath: 1100 W
    • Excitation Optical Filter: Interference optional filter of central wavelength at 365nm, optional central wavelength of 365nm, 405nm, 470nm, 515nm
    • Excitation Wavelength Range: 360-600 nm
    • Emission Wavelength Range: 360-650 nm
    • Wavelength Accuracy: ±2 nm
    • Wavelength Repeatability: ≤1 nm
    • Temp. Range: RT+5-70°C
    • Temp. Accuracy: ≤±0.2°C
    • Temp Resolution: 0.1°C
    • Time for Heating: <25 min (from 20°C to 70°C)
    • Time for Cooling: No cooling function
    • Wavelength Range: 190-1100 nm
    • Wavelength Accuracy: 2 nm
    • Wavelength Repeatability: ±0.5 nm
    • Spectral Bandwidth: 0.3 nm
    • Stability: ±0.001 A/h at 500 nm